Jul 15, 2022
Horizontal directional drilling machine is a kind of drilling machine that is often used in construction projects. This kind of drill is mainly used in places with more small stones and sticky soil. Horizontal directional drilling rigs are used in many places. Because there are many places to use, there is often a situation. Let's talk about the problem of jamming.
When working, the tool may get stuck on the outside wall when drilling, and there will be a problem that it can't be pulled out, which will make the horizontal directional drill unable to rotate by itself. You can't lift it up, and the pole can't be put down. In fact, this has a certain relationship with the people who used it, the ground conditions at that time, and the machine itself. Although there are few such times, if there is, it will not work, and there may be a certain loss. The main reasons for this are as follows:
(1) When drilling, because the speed is very, very fast, it may throw out with some soil or small stones around, and the drill may get stuck;
(2) The stones around the hole will go in and cause sticking;
(3) The teeth for drilling downward are not as sharp as before;
(4) The hole is not straight up and down, but a little inclined;
(5) Confucius collapsed inside;
When encountering the above problems in normal times, the drill pipe should sit on the following points:
(1) Don't lift up quickly with great strength. It's best to lift up and down repeatedly at that time, so that the four sides can become loose. If you mention it forcefully, there may be problems in other places.
(2) When running in the hole, the slag in the place where the deposit is to be guaranteed should be cleaned.
(3) It can be lifted in between. Before that, you need to know how deep it is below.
It's very bad for such a thing to happen to the horizontal directional drilling rig, so we must start from avoiding it and don't let such a thing happen. The problem is not terrible. You must think of the end of the problem as soon as possible and deal with it immediately. If you don't know the reason, you can't move if you haven't seen such a thing before.
October 26, 2016
The Most Successful Engineering Contractor